On the basis of resin coating its
properties fusible interlining can be classified as follows:
1 Polyethylene
coated interlining:
- Polyethylene is used a coating.
- The effect of varying the density of the resin is to give a greater resistance to dry cleaning solvent and a higher softening point with increasing density.
- This type of interlining is used in color, cuff of shirt,
 |
| view of polyethylene coated interlining |
2. Polyamide
coated interlining:
- Polyamide is used as resin coating.
- Polyamides are very widely used in dry cleanable garments.
- High temperature fusing is done for the garments, which are washed with water at 60°c.
 |
| view of polyethylene coating interlining |
3.PVC coated interlining:
- Polyvinyl chloride is used as resin coating.
- This type is suitable for both dry cleanable and washable garments.
- PVC coated interlining is widely used for marking the coat type garments.
 |
| PVC |
4. Polyester coated interlining:
- Polyester is used a coating.
- Polyster resins are used in dry cleanable and washable garments because polyester is less water absorbent than polyamide’
- It can be used as in all types of garments.
- This is called ideal interlining.
- Available in market, but costly in price.
 |
| view of polyethylene interlining |
5. Polypropylene coated
interlining:
- The resin is similar to the properties of polyethylene coated interlining,
- Comparatively high temperature fusing is done.
- The fabric attached with this interlining can be washed with water.
 |
| view of polyethylene interlining |
6. PVA coated interlining.
- Polyvinyl acetate is used as resin coating
- PVA coated interlining is not dry cleanable it has limited wash ability.
- Low temperature and pressure is required. Basically, it is used between the leather and far materials.
- The resin is normally in the form of a continuous plasticized coating on the base fabric.
- This type is rarely used in garment industry’
|
| PVC |
No comments:
Post a Comment