Basic requirements:
Alignment
of fabric ply:
Fabric spreading is done according to length and width or
marker.Every ply should comprise at least the
width of the marker plan.The
marker plan is made to fit the narrowest width .The accuracy in this
alignment could mean the plies do not cover the whole area of the marker plan.
 |
| alignment of fabric ply |
Current
ply tension:
The ply tension should be proper. If the tension is low,
there will is low, there will be ridges in the plies & if the tension is
too high,the fabric may shrink after cutting & sewing.
Fabric
must be flat:
It should be maintained carefully. The operator must pay
attention so that there is no wrinkle during fabric spreading. If the wrinkle
is not removed the panels of garments may be faulty.
No comments:
Post a Comment