Quality Factors in Fabric Spreading

The fabric of the publication:

Fabric deployment means smooth transplant tissue in layers (veil) of the defined length. It is the preparatory process of cutting off fabric. Textile and be published after the shot mark.

Fabric spreading

The quality factors in the deployment:

1. You must maintain a vertical edge respectively.
2. It must remain the ultimate ends of the vertical propagation and preservation of the completion of the length of the propagation. This is done by setting the table at the end of each of the spread (4 points) and completely cut off all the chips for these signs.
3. They should all spread without tension or recession do. A small difference is one that has been stretched veil during the deployment process, when opening or sailing transfer the other party has been subjected to a tension cloth is contained in the sail on the spread in the case expansion. Such a deployment compact, either in front the last chips, or waiting to be cut after the completion of the deployment.

Common problems in publishing:

• A spread of recession have the ends of the length of the excess margin, it seems that waves and ridges on the surface of propagation. The cut will take account of the spread of recession components. The excess can be measured by the length of swirl gently stroking around one end and both sides of the spread.
• narrow strip: It clamped edge wave in the middle of the distribution, while display in the center of the fabric tight end is flat.