Machine
description or working principle:
Cutting table which is perforated. Table is covered with
nylon bristles which support the fabric lays which is flexible enough to permit
penetration and movement of the knife blade which is supported only at the top.
Cutting head is placed in a beam which is set width wise of the table and
cutting head moves lengthwise of the beam according to direction of the
computer memory. Computer and the electrical required of drive the cutter and
the motor. After loading the disc into the computer, the operator positions the
cutting heads origin light over the corner of the spread. Computer controlled
knife cuts according to the instruction from the computer rather than .
knife cutting m/c |
Features:
- This method provides the most accurate possible cutting at high speed.
- Marker is not necessary to cut fabric.
- Cutting knife is oval shapped, very hard.
- This machine is a cam system and work through CAD system.
Here,
- Cutter table,
- Nylon bristle,
- Fabric lay,
- Polyethylene sheet,
- Beam,
- Cutting,
- Computer monitor,
Advantage:
- Very fast cutting operation.
- Very active cutting by computer control.
- Suitable for very large scale production.
- Speed of cutting can be controlled.
- No need of marker.
- Fabric can be cut 6 to 8 times than manual method.
- Cutting knife can be driven at any driven at any direction
- Less labour cost.
Disadvantage:
- Very expensive machine.
- High maintenance cost.
- Skilled manpower is required.
Excellent post, Vinyl Printer and Cutters for retail thankful to all your team for sharing such best information.
ReplyDeleteOutside of Swiss Army knives and their kin, there are a number of single-bladed knives designed for rough outdoor use. knife customization
ReplyDelete